1. Installing Internal Optional Devices
Express5800/R110h-1 User’s Guide
51
Chapter 2 Preparations
Connecting cables
1.8.1
To use an on-board controller or optional RAID controller, connect the interface cable. See the figures below
for how to connect cables.
Important Both SAS hard disk drives and SATA hard disk drives cannot be installed.
Tips
When using SAS hard disk drives, install a RAID controller to the server.
Using the on-board controller for a 3.5-inch drive model
•
Prepare the optional SAS/SATA cable K410-345(00).
•
Connect the 0 to 3 connectors of the K410-345(00) to the SATA0 to SATA3 connectors on the backplane,
respectively.
•
While matching the pin 1 (indicated by the triangle
Δ
) of the S1 and the pin 1 (indicated by the bold line) of
the SGPIO1, connect the S1 connector of the K410-345(00) to the SGPIO1 connector on the backplane.
•
Connect the miniSASHD connector of the K410-345(00) to the MINISAS_HD connector on the
motherboard.
Motherboard
Hard disk drive
Backplane
MINISAS_HD
SLOT 0
SATA 0
SLOT 1
SATA 1
SLOT 2
SATA 2
SLOT 3
SATA 3
