3. EXPRESSSCOPE ENGINE 3
Express5800/R110h-1 User’s Guide
112
Chapter 3 Setup
3.
EXPRESSSCOPE ENGINE 3
3.1
Overview
EXPRESSSCOPE Engine 3 provides a variety of features using BMC (Baseboard Management Controller),
which is a system management LSI.
See
EXPRESSSCOPE Engine 3 User's Guide
for detailed information.
EXPRESSSCOPE Engine 3 monitors the power supply unit, fans, temperature, and voltage of the server. If you
have the management LAN port connected to the network, you can remotely perform the following over a web
browser or SSH client:
•
Manage the server
•
Remotely control the keyboard, video, and mouse (KVM)*
•
Remotely access a CD/DVD/floppy disk/ISO image/USB memory*.
*
To enable this feature, the optional license for remote management (N8115-04) is required.
To actualize these functions, virtual USB mass storage (Remote FD, Remote CD/DVD, Remote USB Memory,
or Virtual Flash) is always connected as USB mass storage.
3.2
EXPRESSSCOPE ENGINE 3 Network Configuration
Take the steps below to use EXPRESSSCOPE Engine 3 through the Web browser.
Run POST following
Chapter 3 (1.1.1 POST sequence).
Wait until the following message appears on the
1.
lower left of the screen.
Press <F2> SETUP, <F3> Internal Flash Memory, <F4> ROM Utility, <F12> Network
Press the <F4> key while the message is being displayed to launch ROM Utility.
2.
Select your keyboard type on Keyboard Selection screen.
3.
