NEC Express 5800/120Eh N8100 SERIES, User Manual

Page: 296 / 342

D-4 Installing Windows Server 2003 x64 Editions
INSTALLING WINDOWS SERVER 2003 X64 EDITIONS
Preparations for Installation
„
NEC EXPRESSBUILDER CD-ROM
„
Microsoft Windows Server 2003 R2 Standard x64 Edition (CD-ROM) / Microsoft
Windows Server 2003 R2 Enterprise x64 Edition (CD-ROM)
„
User's Guide
„
Getting Started
„
Windows Server 2003 x64 Edition OEM-DISK for NEC EXPRESSBUILDER
Creating "Windows Server 2003 x64 Edition OEM-DISK for
NEC EXPRESSBUILDER"
Before installing, create Windows Server 2003 x64 Edition OEM-DISK for NEC
EXPRESSBUILDER.
NOTE:
If you have already "Windows Server 2003 x64 Edition OEM-
DISK for NEC EXPRESSBUILDER" for NEC Express5800 Server
which you are going to install Windows Server 2003 x64 Edition, you
do not need to create it again.
You can create Windows Server 2003 x64 Edition OEM-DISK for NEC EXPRESSBUILDER with
the following two procedures.
„
Create from the menu which appears when running NEC Express5800 Server with NEC
EXPRESSBUILDER.
If you have only NEC Express5800 Server to create Windows Server 2003 x64 Edition
OEM-DISK for NEC EXPRESSBUILDER, use this procedure.
If Windows Server 2003 can be operated on NEC Express5800 Server, you can use the
other procedure described later.
Follow the steps below.
1.
Prepare one 3.5-inch floppy disk.
2.
Turn on your NEC Express5800 Server.
3.
Insert the NEC EXPRESSBUILDER CD-ROM into the DVD-ROM drive of the server.
4.
Press the RESET switch or press Ctrl + Alt + Delete to reboot the server .(You may also
turn off and then on again to reboot the server.)
The system will boot from the CD-ROM and NEC EXPRESSBUILDER starts.
5.
Select [Create Support Disk] from [Tools].
6.
Select [Windows Server 2003 x64 Edition OEM-DISK for NEC EXPRESSBUILDER]
from [Create Support Disk] menu.