manualshive.com logo in svg

NEC Express 5800/120Eh N8100 SERIES, User Manual

Share
Download
NEC Express 5800/120Eh N8100 SERIES User Manual Download Page 132

5-20    Installing the Operating System with Express Setup

Notes of N8103-75

After installing OS, the driver may not be installed depending on the method of installing OS
occasionally.

In that case, please install the driver by the following procedures.

 

1. 

Start [Device Manager] from [Start] menu 

→

 [Control Panel] 

→

 [Administrative Tools]

→

 [Computer Management].

 

2. 

Double-click the SCSI Controller driver which Device Manager lists as Other device.

 

3. 

Click [Update Driver].

 

4. 

When the "Update Device Driver Wizard" appears, select "Install from a list or specific
location [Advanced]" and click [Next].

 

5. 

Select "Don't search. I will choose the driver to install" and click [Next].

 

6. 

Click [Have Disk..].

 

7. 

Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppy
disk drive, enter "a:\" into "copy manufacturer's file from:" and click [OK].

 

8. 

Specify the following driver and click [Next].

–

 

[Adaptec SCSI Card 29320ALP -Ultra320 SCSI ]

The installation of the driver is completed.

Restart the system according to the message appeared on the screen.

Summary of Contents for Express 5800/120Eh N8100 SERIES























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands