![background image](http://html1.mh-extra.com/html/nec/express-5800-120eh-n8100-series/express-5800-120eh-n8100-series_user-manual_4237405243.webp)
Upgrading Your Server 9-37
8.
Assemble the server.
9.
Turn on the power of the server. Make sure that no error message appears in the POST.
If POST displays an error message, take a note on the message and see the POST error
messages listed in Chapter 8.
10.
Run the BIOS SETUP and select [Advanced]
→
[Memory Configuration] to verify that
the installed DIMM shows the status "Normal". (See Chapter 4 for details.)
11.
Select "Yes" for [Reset Configuration Data] on the [Advanced] menu.
This is required to update the hardware configuration information. See Chapter 4 for
details.
12.
If Windows Server 2003 is in use, set the paging file size to the recommended value or a
greater value. See Chapter 5 for details.
Summary of Contents for Express 5800/120Eh N8100 SERIES
