NEC Express 5800/120Eh N8100 SERIES, User Manual

Page: 279 / 342

Appendix A
Specifications
SATA2 Model (N8100-1235F/1236F/1321F/1322F)
NEC Express5800/120Eh
Item
N8100-1235F N8100-1236F N8100-1321F N8100-1322F
Type
Dual-core Intel

Xeon

Processor
Clock / Cache 1.6G/1066/4M 3G/1333/4M 2G / 1066 / 4M 2.33G / 1333/4M
Number of processors 1
CPU
Maximum 2
Chipset Intel Blackford-VS + ESB2E + ServerEngines Pilot
Standard
1GB (512 MB
×
2)
Maximum
24 GB (4 GB
×
6)
Expansion unit
2 DIMMs (512MB
×
2/1GB
×
2/2GB
×
2/4GB
×
2)
Expansion times 2 times
Memory module DDR2-533/667 SDRAM DIMM (Fully Buffered Type), Dual channel
memory configuration supported)
Memory
Error check ECC, ChipKill, Sparing
Graphics (VRAM) Matrox G200 + 2MB
Floppy disk drive
(standard) None
Hard disk drive (standard) None
Hard disk drive
(maximum)
SATA2 (250GB x 4)
Hard disk drive (hot-plug) Optional
Hot Plug SATA2 HDD x 4 with N8154-09F
Auxiliary
input device
DVD-ROM (standard) DVD-ROM x 1 (load on tray, x6 speed or faster)
5.25-inch file bay 3 slots (A DVD-ROM drive is factory-installed.)
3.5-inch disk bay 1-inch height x4 (SATA2 fixed) (Can be changed to SATA2 HotPlug)
Additional PCI slot 5 slots (PCI Express (x8) x1, PCI Express (x4) x1, PCI Express (x1) x1,
64-bit/100MHz PCI-X x1, 32-bit/33MHz PCI x1
Standard On-board SATA SW RAID (0,1) Disk array
Option Disk array controller
IDE (single unit) Ultra ATA100 x1ch
SATA (single unit) SATA2 x6ch
SATA (disk Array) Supports N8103-101 (max. 1 )
SCSI (single unit) Option (for tape unit with N8103-75/95)
SCSI (external Disk
Array) Option (Supports N8103-80/81 (up to 2, SAS DAC (SW/HW) may be
installed together)
SAS (single unit) –
SAS (internal disk array) –
Internal
interface
SAS (external disk array) Supports N8103-90 (up to 3 including N8103-91/99)