1. IML Error Message
Express5800/R120h-1M, R120h-2M Maintenance Guide
182
Chapter 3 Appendix
Class
Error code
Error message
Action
UEFI
268
UEFI Non-Volatile Variable Store
Corruption Detected. If enabled,
Secure Boot security settings may be
lost.
The system configuration has been initialized to
default. Make the necessary settings in the system
utility. If the problem persists, contact your sales
representative.
UEFI
269
IMPORTANT: Default configuration
settings have been restored per user
request. If Secure Boot was enabled,
related security settings may have been
lost.
The system configuration has been initialized to
default. Make the necessary settings in the system
utility. If the problem persists, contact your sales
representative.
UEFI
270
%1 FW Communication Issue - Unable
to communicate with %2 FW. Certain
management functionality is not
available.
Turn off the unit, disconnect the power cord, wait
30 seconds, and then restart it.
If the problem persists, contact your sales
representative.
UEFI
271
Processor %1, DIMM %2 could not be
authenticated as genuine %3.
Enhanced and extended %4 features
will not be active.
The DIMM failed to be authenticated as an
authorized part. Check the DIMM connected to the
unit. If the problem persists, contact your sales
representative.
UEFI
272
IMPORTANT: Processor %1,
DIMM %2 may not be a Genuine %3
DIMM.
The DIMM failed to be authenticated as an
authorized part. Check the DIMM connected to the
unit. If the problem persists, contact your sales
representative.
UEFI
276
Option Card Configuration Error. An
option card is requesting more memory
mapped I/O than is available.
The memory space for the optional card failed to be
allocated. Remove the added optional card so that
the system can be booted. If the problem persists,
contact your sales representative.
UEFI
277
Secure Boot Authentication Failure -
The image on %1 failed authentication
and was not executed.
If the error occurs due to adding of the optional
card, check whether the added card supports the
secure boot. If the problem persists, contact your
sales representative.
UEFI
278
Secure Boot Authentication Failure -
The image on %1 was not authorized
due to revoked certificate(s) and was
not executed.
If the error occurs due to adding an optional card,
make sure whether the added card meets the
conditions required for secure boot. If the problem
persists, contact your sales representative.
UEFI
281
IMPORTANT: SW12 is ON indicating
physical presence. This switch should
only be ON to override certain security
protections.
Set the maintenance switch SW12 to OFF unless
the setting is specified in the operating procedure
etc.
When operating the maintenance switch, follow the
procedure in
Chapter 1 (7. Resetting and Clearing
the Server)
in this manual.
If the problem persists, contact your sales
representative.
UEFI
282
Invalid Server Serial Number and
Product ID - The Serial Number and/or
Product ID have been corrupted or lost.
The serial number and product ID for identifying
the unit are not correctly set. Contact your
maintenance service company.
UEFI
284
DIMM Failure - Uncorrectable Memory
Error - Processor %1 Dimm %2
Contact your sales representative.