2. List of Windows Event Logs
Express5800/R120f-1E Maintenance Guide
198
Chapter 3 Appendix
4
l2nd
Warning
Broadcom BCM57810 #xx: The network link is down.
Check to make sure the network cable is properly connected.
When installing an OS, starting system,
or applying Starter Pack
This event does not affect system operation.
11
Megasas
Error
The driver detected a controller error on \Device\RaidPort(x).
When applying Starter Pack
This event does not affect system operation if it is logged when applying
Starter Pack.
24
mlx4_bus
Warning
MLX4_SF_32_0_0:
Problem - The port was configured to use auto sensing for deciding the
port type. Port * failed to detect the port type automatically.
Impact - As a result the port is being started as an IB port (unless the
port is ETH only). This may cause a connection problem if the other side
is an ETH port.
Reason and suggestion to fix - This problem may happen since the
computer is connected back to back or the cable is unplugged.
To solve this issue connect the port to a switch or define the port type
explicitly (IB or ETH) instead of auto.
When starting system with
N8104-146/147 (InfiniBand card)
connected
If Auto Negotiation fails in InfiniBand connection environment (e.g.,
InfiniBand cable is not connected), the port works as IB port. Thus, this
event does not affect system operation.
27
ixgbt
Warning
Intel(R) Ethernet Controller X540-AT2 #xx
Network link is disconnected.
When starting system, or applying
Starter
This event does not affect system operation.
27
ixgbi
Warning
Intel(R) Ethernet Controller X540-AT2 #xx
Network link is disconnected.
When installing an OS
This event does not affect system operation.
46
volmgr
Error
Crash dump initialization failed!
When installing an OS
Go to the following Microsoft website for details.
134
Microsoft-Windows-Time-S
ervice
Warning
NtpClient was unable to set a manual peer to use as a time source
because of a DNS resolution error on 'time.windows.com,0x9'. NtpClient
will try again in 15 minutes and double the reattempt interval thereafter.
When installing an OS, starting system,
or applying Starter Pack
If it is not registered after connecting to the Internet, there is no problem
with system operation.
153
disk
Warning
The I/O operation at the logical block address for disk was retried.
•
The on-screen indication may differ depending on system
environment.
•
The character string of this event may not be displayed correctly,
however, it does not affect the system operation.
When creating logical drive by Universal
RAID Utility
If this event is logged when creating a logical drive by Universal RAID
Utility, there is no problem in system operation.
The character string of the event will be correctly displayed by applying
the Microsoft's update program on the following site:
