6. Details of EXPRESSBUILDER
Express5800/R120f-1E Maintenance Guide
166
Chapter 2 Useful Features
6.
Details of EXPRESSBUILDER
EXPRESSBUILDER helps you to install Windows and maintain the server.
EXPRESSBUILDER also provides bundled software and instruction manuals.
6.1
Starting EXPRESSBUILDER
You can start EXPRESSBUILDER by using the following ways.
Remove a CD/DVD and removable media from the server, restart the server and press <F3> key at the
following POST message.
Internal Flash Memory:
Press <F2> SETUP, <F3> Internal Flash Memory, <F4> ROM Utility, <F12> Network
When EXPRESSBUILDER starts from Internal Flash Memory, Boot Selection Menu shown in Chapter 2
(5.2 Menus of EXPRESSBUILDER) - (1) Boot Selection Menu will appear.
Use the DVD by the following two ways:
EXPRESSBUILDER DVD:
(1) Insert the DVD into the server, and then restart.
Boot Selection Menu shown in Chapter 2 (5.2 Menus of EXPRESSBUILDER) - (1) Boot Selection
Menu will appear.
(2) Insert the DVD into a computer running Windows.
Autorun Menu shown in Chapter 2 (5.2 Menus of EXPRESSBUILDER) - (4) Autorun Menu will appear.
You can run EXPRESSBUILDER as a Windows application after installing Starter Pack.
Windows Application:
Run
NEC EXPRESSBUILDER
from Start menu or run the shortcut on the desk top.
When
EXPRESSBUILDER is launched as Windows application, Autorun Menu shown in Chapter 2 (5.2
Menus of EXPRESSBUILDER) - (4) Autorun Menu will appear.