5. Troubleshooting
Express5800/R120f-1E Maintenance Guide
31
Chapter 1 Maintenance
[?]
The following message appears when installing OS, and cannot proceed
→
The USB optical disk drive is connected to USB3.0 port. Connect an optical disk drive to USB2.0 port.
See Chapter 1 (4. Names and Features of Component) in User’s Guide.
[?]
Unable to access the partition which was previously created after reinstalling while several disks are
connected
→
For details, refer to the Microsoft website below:
[?]
When Windows Server 2008 R2 is installed while several disks are connected, the system partition and
the boot partition (100 MB) are created in another disk
→
For details, refer to the Microsoft website below:
[?]
When Starter Pack is installed on Windows Server 2008 R2, the following message appears for a moment
upon shutdown
→
No problems for system operation.
For details, refer to the Microsoft website below:
[?]
Windows has been installed as "Workgroup" although the installation option was "Join the domain"
Is the LAN cable properly connected?
→
If the LAN cable is not connected, Windows is installed in workgroup setting, not in domain setting. After
the OS is started, join the domain by using Control Panel.
1 program still needs to close:
(Waiting for) Task Host Window
