4. Names and Functions of Parts
Express5800/R120e-1M User’s Guide
42
Chapter 1 General Description
4.7.3
LINK/ACT LED (
1,
2,
3,
4)
LINK/ACT LED on front panel indicates the status of LAN port.
LEDs
3 and
4 turns on, off, or flashes when an optional LAN riser card is installed.
The following table lists LINK/ACT LED patterns.
LINK/ACT LED pattern
Description
On (green)
The server is connected with network normally.
Flashing (green)
The server is accessing network.
Off
The server is disconnected from network.
4.7.4
DISK Access LED ( )
DISK Access LED indicates the status of HDDs.
The following table lists DISK Access LED patterns.
DISK Access LED pattern
Description Solution
On (green)
Hard disk drive is being accessed.
–
On (amber)
(only when RAID system is
configured)
Hard disk drive is failing.
Contact your sales representative.
Flashing green and amber
alternately.
(only when RAID system is
configured)
Rebuild is in progress.
–
Off
Hard disk drive is halted.
–
4.7.5
Optical Disk Drive Access LED
The LED for optical disk drive at the front of the server flashes when a CD or DVD is being accessed.
4.7.6
UID LED (ID)
UID LED is provided one each at the front and rear of the server. If you press UID Switch provided at the
front or rear of the server, the light turns on. If you press it again, the light turns off. It flashes when
commands from software are received. This LED is used to identify the target server among multiple servers
installed in a rack. Especially when performing maintenance from behind the server, lighting the LED will
help you to identify which server to work with.
The following table lists UID LED patterns.
UID LED pattern
Description
On (blue)
The UID switch is pressed.
Off
The UID switch is not pressed.
Tips
You can turn on an LED using remote management software.
