NEC EXP291 User Manual Download Page 84

Page: 84 / 138

1. Installing Internal Optional Devices

Express5800/R120e-1M User’s Guide

Chapter 2 Preparations

1.12

LAN

Riser

Card

The server supports LAN Riser Card that allows a LAN port to be added.

Install LAN Riser Card to the LAN Riser Card slot on motherboard. The motherboard has one slot to install
LAN Riser Card.

Important You must avoid static electricity to work with the procedure below. For

details, see Chapter 2 (1.2 Anti-static Measures).

1.12.1

Installation

Follow steps below to install LAN Riser Card.

See steps 1 to 6 in

Chapter 2 (1.3 Overview of Installation and Removal)

for preparations.

Remove the scrw that secures the PCI riser card, and remove the PCI riser card.

Remove the screw from the blank cover.

Remove the blank cover.

Note

Keep the removed cover for future use.

Summary of Contents for EXP291











































































































































Search results

Summary of Contents for EXP291

Reviews:

Related manuals for EXP291

Brands by name

Popular brands

NEC EXP291, User Manual

Search results

Summary of Contents for EXP291

Reviews:

Related manuals for EXP291

Brands by name

Popular brands