1. Installing Internal Optional Devices
Express5800/R120e-1M User’s Guide
70
Chapter 2 Preparations
1.10.6
Removal / Replacement
To remove DIMM, reverse the installation procedure.
Be sure to install dummy cover to the slots from where DIMMs are removed.
Important Failing to install dummy cover to vacant slot may cause malfunction of the
server due to insufficient cooling effect.
Note
•
When removing a defective DIMM, check error messages displayed at POST or
NEC ESMPRO and check the DIMM socket where the defective DIMM is
installed.
•
At least one DIMM needs to be installed for the server to operate.
Take the steps below after replacing or removing DIMMs.
1.
Confirm that no error messages are displayed on POST. If any error message is displayed, see
Chapter
3 (1. Post Error Message)
in "
Maintenance Guide
".
2.
Run BIOS Setup Utility, select
Memory Configuration
from the
Advanced
menu, and then specify
Yes
for
Memory Retest
. After that, select
Save Changes and Exit
to reboot.
3.
Set the size of Paging File to the recommended value (Total memory size x 1.5) or more.
If using a Windows OS, see
Chapter 1 (7.1 Specifying Memory Dump Settings (Debug Information))
in
"
Installation Guide (Windows)
".
For other OS, follow the manual of the OS.
