1. Specifications
Express5800/R120e-1M User’s Guide
137
Chapter 4 Appendix
Product name
Express5800/R120e-1M
N code
N8100-2073F
N8101-681F N8101-682F N8101-683F N8101-684F N8101-685F N8101-686F
Intel ®Xeon® processor
CPU
E5-2650 v2
E5-2660 v2
E5-2670 v2
E5-2690 v2
E5-2697 v2
E5-2695 v2
Clock speed
2.60GHz
2.20GHz 2.50GHz 3.00GHz 2.70GHz 2.40GHz
Number of CPUs,
standard/maximum
1/2
3rd cache
20M
25M
30M
CPU
Number of cores (C) /
Number of
threads (T) per CPU
8C/16T 10C/20T
12C/24T
Chipset
Intel® C602-J chipset
Capacity,
standard/maximum
Not pre-installed /Unbuffered DIMM: 64GB (16x 4GB),
Registered DIMM: 384GB (24x 16GB),
Load Reduced DIMM: 1536GB (24x 64GB)
Memory module
DDR3L-1600 Unbuffered DIMM (4GB),
DDR3L-1600 Registered DIMM (2/4/8/16GB), DDR3L-1866 Registered DIMM (8/16GB),
DDR3L-1333 Load Reduced DIMM (32GB), DDR3L-1600 Load Reduced DIMM (64GB)
Maximum operating
frequency
1866MHz
Error check, correction
ECC, x4 SDDC, Memory LockStep (x8 SDDC)
Memory sparing
Supported
Memory
Memory mirroring
Supported
Internal
(standard)
－
Internal
(maximum)
2.5-inch HDD: SATA 8TB (8x 1TB), SAS 9.6TB (8x 1.2TB),
2.5-inch SSD: SAS 3.2TB (8x 400GB)(with optional HDD cage installed)
Hard disk
drive
Hot swap
Supported
Interface / RAID level
SATA 3, 6Gb/s : RAID 0/1/5/6/10/50/60 (Option)
SAS 6Gb/s : RAID 0/1/5/6/10/50/60 (Option)
Optical disk drive
Internal or external drive (option) *1
FDD
Option: Flash FDD (1.44MB) *2
Auxiliary
storage
Expansion bay
None
Expansion
slots
Supported slots
1x PCI EXPRESS 3.0 (x16 lane, x16 socket) (Full hight, length 220 mm)
1x PCI EXPRESS 3.0 (x8 lane, x8 socket) (Low profile, length 220 mm)
1x PCI EXPRESS 3.0 (x8 lane, x8 socket) (Dedicated to RAID Controller)
1x PCI EXPRESS 3.0 (x8 lane, x8 socket) (Dedi
Chip/VideoRAM
Embedded management controller chip / 32 MB
Graphics
Graphic display /
resolution
16,770,000 colors: 640x840, 800x600, 1,024x768, 1,280x1,024
Interface
9x USB 2.0 (2x front, 4x rear, x3 internal), 2x Analog RGB (Mini D-sub15-pin, 1x front, 1x rear),
1x Serial port (RS-232C compliant / D-sub 9-pin, Serial port A, 1x rear, optional port can be used (up to two
ports in total)).
2x 1000BASE-T LAN connector (1000BASE-T/100BASE-T/10BASE-T supported, RJ45, 2x rear),
1x Management LAN connector (100BASE-T/10BASE-T supported, RJ45, 1x rear)
Power supply unit
Not pre-installed / 450W or 800W 80 Plus® Platinum compliant (bipolar grounded outlet) (hot-plug available)
maximum: 2 units) 100/200 VAC ± 10%, 50/60 Hz ± 3 Hz
Redundant power supply
Supported (option, hot-plug available)
Redundant fan
Supported (standard, hot-plug unavailable)
External dimensions (width × depth ×
height)
439.8mm x 722.0mm x 43.4mm (front bezel/ protrusions/ inner rails excluded)
482.4mm x 757.0mm x 44.4mm (front bezel/ protrusions/ inner rails included)
Weight (Standard/ Max.)
15.2 kg / 23 kg (including rails)
High-load state
614VA/613W
614VA/613W
654VA/653W 684VA/683W 684VA/683W 654VA/653W
Power
consumption
(100V at
maximum
configuration)
40°C environment
710VA/700W
710VA/700W
750VA/740W 780VA/770W 780VA/770W 750VA/740W
Operating
10 to 40°C / 20 to 80%,
10 to 35°C / 20
to 80%,
10 to 40°C / 20
to 80%,
Environmental
requirements
Temperature/Humidity
Storage –10
～
55°C / 20 to 80% (no condensation either when operating or when stored)
Main accessories
EXPRESSBUILDER (NEC ESMPRO Manager) (Windows), NEC ESMPRO Agent, User’s Guide (electronic
document) included), Getting Started, one-touch rack rail
Installed OS
－
Supported OSs
Microsoft Windows Server 2008 Standard (RTM, SP2 or later), Microsoft Windows Server 2008 Enterprise
(RTM, SP2 or later),
Microsoft Windows Server 2008 Standard (x64) (RTM, SP2 or later), Microsoft Windows Server 2008
Enterprise (x64) (RTM, SP2 or later),
Microsoft Windows Server 2008 R2 Standard, Microsoft Windows Server 2008 R2 Enterprise
Microsoft® Windows Server® 2012 Standard, Microsoft® Windows Server® 2012 Datacenter,
VMware ESXi™ 5.1 update 1,
Red Hat® Enterprise Linux® 5.9 or later, Red Hat® Enterprise Linux® 5.9 or later (EM64T)
Red Hat® Enterprise Linux® 6.4 or later, Red Hat® Enterprise Linux® 6.4 or later (x86_64)
*1
If you do not intend to install an internal DVD-ROM or an internal DVD SuperMULTI in all systems, prepare at least one external DVD-ROM per
system for maintenance and OS reinstallation purposes.
*2
Prepare this if required. For the principal uses of a Flash FDD, refer to the notes on Flash FDD in the Maintenance Guide.
