Section 3: Features
60
◆
Section 3: Features
DS1000/2000 Product Description
2.
Line Key (from lowest to highest)
3.
Loop Key (from lowest to highest)
Feature Operation
To answer a call on a Loop Key:
1.
Lift h Press Switched Loop Key.
To place a call on a Loop Key:
1.
Lift h Press Loop Key + Dial trunk group code (0-8) + Dial outside number.
Meet-Me Conference
Availability: All versions.
With Meet-Me Conference, an extension user can set up a tele-
phone meeting with their co-workers. Each party joins the Con-
ference by dialing a Meet Me Conference code. Meet Me
Conference lets extension users have a telephone meeting —
without leaving the office. Users must join the meeting within the Meet-Me Conference interval.
The system has two Meet-Me Conference codes (#11 and #12). After a Meet-Me Conference is set up
and the Meet-Me Conference interval expires, the code used becomes available for a new meeting.
Since Meet-Me Conference is a type of Conference, the system’s Conference capacity determines:
●
The number of users that can join a Meet-Me Conference
and
●
The number of simultaneous conferences.
The following table shows the Conference capacities:
The system’s 32 Conference circuits are dynamically allocated as users request them.
Feature Quick Steps
To set up a Meet-Me Conference:
1.
Page parties and announce the Meet-Me Conference code (#11 or #12) + Do not hang up.
2.
Press
ICM
+ Dial announced Meet-Me Conference code (#11 or #12).
To join a Meet-Me Conference:
1.
Listen for paged invitation to join the Conf Press
ICM
.
Description
Capacity
Conference circuits
32
Maximum simultaneous users in Conference
(total of all Conferences system-wide)
32
Maximum simultaneous conferences
8
Maximum parties in any one Conference
(trunks and/or extensions)
8
Set up a multiple-party
telephone conversation with
your co-workers.
