NEC DLP CINEMA NC2500S, Installation Manual

Page: 85 / 134

Touch Panel 3. Setting Up Your Projector
B-18
[7] Measure the chromaticity [x,
y] of the screen center, then
enter the measured value
into the [x] section and the
[y] section located under
[Green].
[8] Press “Blue” button.
There will be projection to the screen in
the native color (Blue) of the projector.
[9] Measure the chromaticity [x,
y] of the screen center, then
enter the measured value
into the [x] section and the
[y] section located under
[Blue].
[10] Press “White” button.
There will be projection to the screen in
the native color (White) of the projector.