Touch Panel
4. Menu Descriptions & Functions
B-50
4.6
LAMP Screen
Press the “LAMP” button from the menu bar to go to the LAMP screen.
From the LAMP screen, you can adjust the lamp output and display the lamp information.
- Adjust
:To adjust the lamp brightness. (See This page)
- Information :To display the lamp information.(See Next page)
- Setup
:Screen used by the service Personnel. [T.B.D]
4.6.1
LAMP Screen (Adjust)
Lamp Output
Adjusts the lamp output (brightness). Control the current at
0.1 A increments.
FeedBack
Sets the lamp brightness constant mode that uses a
brightness sensor.
・
Disable: Disables the lamp brightness constant mode.
・
Enable: Enables the lamp brightness constant mode.
Lamp Memory
The lamp output values after adjustment through the LAMP
screen can be saved to the memory in the projector.Press
the “Memory List” button to display Lamp Memory screen.
Summary of Contents for DLP CINEMA NC2500S
