NEC DLP CINEMA NC2500S, Installation Manual

Page: 130 / 134

Touch Panel 4. Menu Descriptions & Functions
B-63
4.11 LAN Screen
This menu is only available in the Installation or Service mode.
Press the “LAN” on the menu bar to display the LAN Screen.
The "LAN" screen consists of five windows below.
- IP Address
: Used when making LAN settings of SYSTEM and CINEMA.
- Network Type : Used to select communication mode when a wireless LAN is used:
- WEP
: Used to set up whether WEP (data encryption) should be used or not:
- Mail : Used to set up mail function.
- DHCP : Used to setup DHCP server.
4.11.1 LAN Screen (IP Address)
Automatic
／
Manual
Select Automatic if IP address is automatically assigned by a DHCP server
through the network connected to your projector. If not, select Manual. In this
case, you must make entries in the IP Address and Subnet Mask fields.
Automatic --- IP address, subnet mask and gateway are automatically
assigned by a DHCP server.
Manual --- IP address, subnet mask, etc. are assigned by the network
administrator. Entries are required.
System IP Address If Manual is clicked in the IP Setting box above, enter in this field the System IP
address (12 numerals) in the network to which it is connected.
Cinema IP Address If Manual is clicked in the IP Setting box above, enter in this field the Cinema IP
address (12 numerals) in the network to which it is connected.
Subnet Mask If Manual is clicked in the IP Setting box above, enter in this field the subnet
mask (12 numerals) of the network to which your projector is connected.
System Name Enter the System name in a maximum string of 16 characters comprised of
alphanumeric characters and symbols.This entry permits your PC to identify the
System when a multiple number of projectors are connected to the same LAN.