NEC DLP CINEMA NC2500S, Installation Manual

Page: 5 / 134

NC2500S Important Information
A-2
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS,
DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE. ALSO DO NOT USE THIS
UNIT’S POLARIZED PLUG WITH AN
EXTENSION CORD RECEPTACLE OR
OTHER OUTLETS, UNLESS THE PRONGS
CAN BE FULLY INSERTED. REFRAIN
FROM OPENING THE CABINET AS
THERE ARE HIGH-VOLTAGE COMPONENTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
OPEN COVER. NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol warns the user that uninsulated
voltage within the unit may have sufficient
magnitude to cause electric shock. Therefore,
it is dangerous to make any kind of contact
with any part inside of this unit.
This symbol alerts the user that important
literature concerning the operation and
maintenance of this unit has been included.
Therefore, it should be read carefully in
order to avoid any problems.
Precautions:
Please read this
prior to setup to use your NC2500S
safely. To use this projector safely,
always observe the following precautions
when setting up the projector and
lamp power supply. There is the possibility
of serious accidents that can lead to
death or serious injuries if the projector is
handled improperly because these
precautions were ignored. Handle this
projector only after you completely
understand these precautions.
DOC compliance Notice
This Class A digital apparatus meets
all requirements of the Canadian Interference-
Causing Equipment Regulations.
WARNING
This is a Class A product. In a domestic
environment this product may cause
radio interference in which case the
user may be required to take adequate
measures.
CAUTION
• In order to reduce any interference
with radio and television reception
use a signal cable with ferrite core
attached.
Use of signal cables without a ferrite
core attached may cause interference
with radio and television reception.
• This equipment has been tested and
found to comply with the limits for a
Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
when the equipment is operated in a
commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed
and used in accordance with the
installation manual, may cause harmful
interference to radio communications.
Operation of this equipment in a
residential area is likely to cause harmful
interference in which case the user
will be required to correct the
interference at his own expense.
Important Safeguards
These safety instructions are to ensure the
long life of your projector and to
prevent fire and shock. Please read
them carefully and heed all warnings.