1-9
Installation
1. Installation
Desktop Charger Wall Mounting
The Desktop Charger is also designed to be wall mounted. You can mount your phone directly on a wall. Before mounting your
charging unit, consider the following:
• Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard
when inserting screws into the wall.
• Make sure the wall material is capable of supporting the weight of the Desktop Charger.
• Use #10 screws with anchoring devices suitable for the wall material where the Desktop Charger will be placed.
1. Insert two mounting screws into the wall 1-9/10 inches apart. Allow about 3/16 of an inch
between the wall and screw heads for mounting the phone.
2. Plug the AC Adapter into the Desktop Charger as previously described. Wrap the AC Adapter cord
around the strain relief.
3. Place the Desktop Charger on the posts of the wall screws and push down until it is firmly seated.
4. Plug the AC Adapter into a standard
120V AC wall outlet.
Attaching the Belt Clip to the Handset
You can use the Belt Clip to attach the handset to your belt or pocket for convenient portability.
1. Slide the clip into the tab slot.
CAUTION: The Belt Clip is designed to fit sungly onto the handset.
2. Press firmly unti it snaps into place.
3. To remove, simply press the retaining clip in toward the Belt Clip blad and slide the clip up at the same time.
Summary of Contents for 910i
