NEC 910i Installation And User Manual Download Page 9

Page: 9 / 106

1-7

Installation

1. Installation

Applying Power to the Base Unit

Use the supplied 10V adaptor.

Applying Power to the Desktop Charger

Use the supplied 9V AC adaptor. Wrap the power cord around the convenient notch on the bottom.

IMPORTANT

! Route the power cord where it will not create a trip hazard, or where it could become chafed and create a fire or

other electrical hazard.

Note:

The AC adaptors furnished with this phone may be equipped with a polarized line plug (a plug having one blade wider

than the other). This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try
reversing the plug. Do not alter the shape of the blades of the polarized plug.

Note:

If you cannot plug the AC adaptors into the outlet, contact someone about replacing the outlet.

Before using your phone, be sure to raise the antenna to the vertical position.

Summary of Contents for 910i











































































































Search results

Summary of Contents for 910i

Reviews:

Related manuals for 910i

Brands by name

Popular brands

NEC 910i, Installation And User Manual

Search results

Summary of Contents for 910i

Reviews:

Related manuals for 910i

Brands by name

Popular brands