![background image](http://html.mh-extra.com/html/nec/910i/910i_installation-and-user-manual_248423096.webp)
3-4
Specifications
Receive/Transmit Information
Base Unit:
902 MHz to 928 MHz
Handset:
902 MHz to 928 MHz
Bandwidth:
+ 500KHz (+/- 25 KHz)
Power Level:
60mW approximately
Output Watts
0.063
Range:
350’ in an office facility
80,000 square feet in a warehouse facility
Mechanical Specifications
Base Unit
Width
Depth
Height
Weight
4 1/4”
7 1/2”
2 1/4”
15.4 oz.
Handset
Width
Depth
Height
Weight
2 1/5”
1 2/3”
8 2/3”
8.8 oz.
(with antenna)
(with battery)
Desktop Charger
Width
Depth
Height
Weight
3 5/8”
4 1/4”
3 5/8”
6.5 oz.
Cabling Requirements
1. Do not run station cable in parallel with the AC source, telex or computer, etc. If the
cables are near cable runs to those devices, use shielded cable with grounded
shields or install the cable in conduit.
2. When cables must be run on the floor, use cable protectors.
3. The cable run must be a dedicated, isolated cable pair.
4. Use 1-pair twisted 24 AWG cable (2-pair cable if installing an optional desk phone),
cable run length not to exceed 2,000 feet.
Summary of Contents for 910i
