NEC 4650N - SuperScript Color Laser Printer, User Manual

Page: 76 / 137

70 SuperScript 4650 Series — User’s Guide
Operator Panel Menus
The Operator Panel for the 4650N(X) model printers has
eight main menus, described below. The 4650 model printer
does not include the PCL or the Advanced Features menu.
Default selections for each setting are marked with an
asterisk (*).
Control Menu
Use this menu to cancel the current print job or reset the
printer when the printer is in an error state. Selecting
RESET
PRINTER
restarts the printer and causes it to reinitialize and
perform a self-test.
RESET NIC
allows you to reset the
network interface parameters without rebooting.
*Default selection for the setting.
Setup Menu
Use this menu to configure the default settings for jobs that
are not sent using printer driver software, or restore the
factory default settings. The
JOB DEFAULTS
submenu allows
you to set the appearance of print jobs. The
MISCELLANEOUS
menu allows you to set printer operation settings. Select
RESTORE DEFAULTS
to return printer settings to their factory
defaults (except communications parameters).
RESET PRINTER
RESET NIC
CONTROL
CONFIRM
PARAMETERS
JOB HOLD PRINT*
JOB DEFAULTS
MISCELLANEOUS
SETUP
RESTORE DEFAULTS
POWER SAVE
JAM RECOVERY
MEMORY
EDGE SMOOTHING
RESOLUTION**
COPIES
ENABLE / DISABLE*
600 x 600* / 1200 x 1200
1* to 999
NO / YES*
NEVER, 30 MIN., 1HOUR*,
32MB, 64MB,
96MB, 128MB,
1.5HOURS, 2HOURS, 3HOURS
160MB, 192MB, 256MB