NEC 4650N - SuperScript Color Laser Printer, User Manual

Page: 72 / 137

66 SuperScript 4650 Series — User’s Guide
The Message Display
The Operator Panel status display is an LCD panel that
shows status messages, alert messages, media types, and
menu selections. When the printer is performing a job, the
display indicates a printer status message, such as
PROCESSING
,
PRINTING
, etc. The standard display is
READY
,
meaning the printer is ready for use. The table below lists
Status messages with their explanation. Alert messages are
explained on page 98. Service messages require that you call
an authorized service representative. See page 109 for
information about service and technical support.
Status Message Explanation
INITIALIZING Indicates that the printer is performing startup tests.
RESETTING Indicates that the printer settings are being restored to their factory defaults.
WARMING UP Printer is not yet ready to operate. It is performing an initial power up check or the fuser
unit is warming up to operating temperature.
READY Printer is online and ready to print under Auto Emulation Switching mode.
PRINTING Printer is printing a page.
PROCESSING Printer is processing a job.
WAITING Printer is waiting for additional input to complete the print job.
POWER SAVE
MODE Printer is in Power Saving mode. When the printer receives data or you press any button,
the display restores ordinary printer messages.
MEDIA TYPE <type> Shows the current paper type <
PAPER OR THICK STOCK
> when user presses Media button.
SELECTED Appears when a setting is selected.
TEST PRINT Printer is printing a test page.
FIRST JOB Startup page is printing (if enabled).
RESETTING JOB Printer is resetting a job.
OFFLINE Printer is offline.
PRESS SELECT TO
CANCEL JOB This appears if you press the Online button while the printer is processing a job or waiting
for additional input to complete the print job. Then press the Select button to cancel the job
or press the Online button again to continue.