manualshive.com logo in svg

Nec Casio DT700, User Manual

The Digi Sport Instruments DT700 is a cutting-edge digital sports watch designed for active individuals. With a sleek and durable design, this watch boasts a range of advance features including a built-in compass, stopwatch, and heart rate monitor. Get the most out of your timepiece by downloading the user manual for free from our website.

Share
Download
background image

C O N T E N T S

ii

Contents

DT700 Phone User Guide

8LK-L Module Installation ............................................................................3-61

To install the 8LK-L Module .....................................................................3-61
To install 8LK-L Line Key Card (Optional) ...............................................3-62

DCL-60 Console (Type A) Installation .........................................................3-62

Prepare the phone ...................................................................................3-62
Prepare the DCL-60 Console...................................................................3-64
Connect the DCL-60 Console to the phone .............................................3-64
To install DCL-60 Line Key Card (Optional).............................................3-65

4

Basic Settings/Configuration..................................................4-67

Basic Setup with the Cursor Pad or Up/Down Keys .......................................4-68

To adjust the ringing volume....................................................................4-68
To adjust the Soft Ring volume (SIP@Net Platforms) .............................4-68
To adjust the headset ringing volume ......................................................4-69
To adjust the call volume (handset) .........................................................4-69
To adjust the call volume (headset) .........................................................4-69
To adjust the call volume (speaker) .........................................................4-70

Basic Setup with the Menus and Cursor Pad..................................................4-70

To select an Internal Ringtone .................................................................4-70
To select an External Ringtone................................................................4-72
To enable an external headset ................................................................4-73
To set external headset ringing (Optional)...............................................4-74
To set the Call Waiting volume ................................................................4-75
To set the Hold Reminder volume ...........................................................4-76
To change the Display Language ............................................................4-77
To set the Date Format ............................................................................4-78
To set the Time Format............................................................................4-79
To adjust the LCD contrast ......................................................................4-80
To change the LCD Backlight Timeout ....................................................4-81
To enable or disable the Backlight Fade (DT730G ITL-12CG, ITL-24CG 
and ITL-32CG only) .................................................................................4-82
To edit the Dial Preference ......................................................................4-83
To Clear User Settings.............................................................................4-84
To Clear Personal Directory.....................................................................4-85
To Clear Call History................................................................................4-86
To restart your phone...............................................................................4-88
To view the phone settings ......................................................................4-88
To view the firmware information for your phone.....................................4-89
To view the IP address of your phone .....................................................4-89
To view the maximum numbers of calls you can handle 
on your phone ..........................................................................................4-90

Speed Dial and Personal Directory Character Sets ........................................4-91

5

DT730 ITL-8LD with Display....................................................5-95

DT730 ITL-8LD DESI-Less Display ................................................................5-96

Startup Display ............................................................................................5-96
Programmable Key Information Display ......................................................5-96

Summary of Contents for DT700







































































































































































































































































































































































































Reviews:

No comments

Related manuals for DT700

8*8 SPA 303 Quick Start Manual preview
SPA 303
Brand: 8*8 Pages: 5
Samsung SGH-E800 Manual preview
SGH-E800
Brand: Samsung Pages: 108
Camrivox Flexor 500 Quick Install Manual preview
Flexor 500
Brand: Camrivox Pages: 4
Samsung SM-A356E User Manual preview
SM-A356E
Brand: Samsung Pages: 155
Aztech Skype V500DS-S1 Features preview
Skype V500DS-S1
Brand: Aztech Pages: 2
Vonino Pluri C8 Quick Start Manual preview
Pluri C8
Brand: Vonino Pages: 87
RATH MICROTECH SMARTPHONE II Simplified Programming Instructions preview
SMARTPHONE II
Brand: RATH MICROTECH Pages: 2
Kyocera Rave K-7 User Manual preview
Rave K-7
Brand: Kyocera Pages: 56
Yealink T19(P) E2 Manual preview
T19(P) E2
Brand: Yealink Pages: 21
Sagem MY600V User Manual preview
MY600V
Brand: Sagem Pages: 64
Sagem OT860RF User Manual preview
OT860RF
Brand: Sagem Pages: 84
Pharos Traveler 137E User Manual preview
Traveler 137E
Brand: Pharos Pages: 104
DSC 3G2080 Installation Manual preview
3G2080
Brand: DSC Pages: 20
iPRIMUS Lingo 302 Quick Start Manual preview
Lingo 302
Brand: iPRIMUS Pages: 2
AEI SKD-1200 Qig preview
SKD-1200
Brand: AEI Pages: 4
Ericsson A1228c User Manual preview
A1228c
Brand: Ericsson Pages: 60
IPRO V7 User Manual preview
V7
Brand: IPRO Pages: 16
Motorola CITRUS User Manual preview
CITRUS
Brand: Motorola Pages: 62

Brands by name

Popular brands

Load more brands