Nec Casio DT700, User Manual

Page: 101 / 390

. . . . .
B A S I C S E T T I N G S / C O N F I G U R A T I O N
Basic Setup with the Menus and Cursor Pad
DT700 Phone User Guide
4-83
Figure 4.46 LCD Low Power Mode settings
5
Select
1
Enable or
2
Disable.
By default, low power mode is enabled on the phone.
6
Press Enter
b
on the cursor pad or the OK softkey to accept the setting.
You can also press the Cancel softkey to exit without making any changes.
To edit the Dial Preference
Note:
If you do not see this menu option, it has been disabled by your system
administrator.
You can set your phone to prompt you to confirm the number when dialing Personal
Directory, Speed Dial, or Call History entries. For example, if you dial external
numbers from your Call History often, you can set your dial preferences to edit before
dialing so you can enter the outside line access code when your phone dials. If you
dial mostly internal numbers or use Personal Directory entries that have the outside
line access code already programmed into the number, you can set the dial
preference so the telephone numbers dials directly.
Note:
The Dial Preference you select is applied to both the Call History and Personal
Directory/Speed Dials.
1
Press the Menu key.
2
Select
3
User Settings.
3
Select
6
Edit Before Dialing.
Figure 4.47 Edit Dial Preference
4
Select your dialing preference.