Nec Casio DT700, User Manual, Page: 128 / 390

B A S I C P H O N E O P E R A T I O N
Basic Call Operation
7-110
DT700 Phone User Guide
configuration parameters. For more information about the incoming call ringing tones
for your system, contact your system administrator.
Note:
Soft Ring is only valid for SIP@Net platforms. Contact your system
administrator to determine if Soft Ring is available on your system.
P L A C I N G C A L L S
E X T E R N A L C A L L S
To place an external call
Calls made to numbers that are outside of your system usually require an outside line
access code.
1
Lift the handset, press the Speaker key, or press the NewCall softkey to receive dial
tone.
Figure 7.8 NewCall softkey
2
Enter the outside line access code using the keypad (8, for example) if required, then
enter the telephone number of the outside party.
You can use the Delete softkey to delete the last digit (backspace).
Figure 7.9 Enter number (external call)
3
Press the Dial softkey to initiate the call, or wait a few seconds for the call to be
automatically dialed.
Figure 7.10 Dial softkey