background image

C A L L   H I S T O R Y,   A N D   T H E   C O R P O R A T E   A N D   P E R S O N A L   D I R E C T O R I E S

The Help key

11-262

DT700 Phone User Guide

Figure 11.2

DT710 (ITL-6DE) softkeys 

D T 7 1 0   I T L - 6 D E   E C O N O M Y   P H O N E   D I S P L A Y

The DT710 ITL-6DE LCD area shows three lines of information, while the DT730 
phones (ITL-12D, ITL-24D and ITL-32D) are capable of showing five lines of 
information. Most screen examples in this guide are for DT730 phones.

Figure 11.3

Main Menu Display for ITL-6DE

The 

 Up and 

 Down softkeys on the phone indicate to the user when there are 

more options than displayed on the LCD screen.

Figure 11.4

 Up and 

 Down softkeys on Change or Select Monitor 

Menu Display for DT710 ITL-6DE Phones

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

T H E   H E L P   K E Y

Note:

This feature is not available on DT710 (ITL-2E) model phones.

Using the Help key

You can use the Help key to view information about the softkeys that are displayed on 
your phone.

1

Press the Help key.

Softkeys

Summary of Contents for DT700







































































































































































































































































































































































































Reviews: