Neat WALL Famiy, Technical Handbook

Page: 35 / 56

neat
35
NE41 11014-02 v4.1 WALL - Technical Handbook
When a Radio event is trigged the logic in the unit looks at Radio event #1 and checks
the criterias and conditions. If this first action is not executed (no criteras and/or
conditions are met) the next Radio event is examined.
If a Radio event action is executed the logic stops from checking further, i.e. if
Radio events #1 and #2 do not meet any criteria but #3 does, then the logic will not
continue to #4.
Radio event
Position
Match?
Radio ID
match?
Alarm type
match?
User type
match?
Conditions
match?
Yes
Yes
Yes
Yes
Yes
Perform action End
Next Radio
event# <=8?
Yes
No
No
No
No
No
No
Picture 39.
Flow chart of the Radio event conditions and criterias check.
5.10.1 Position
The “Position ID code” can be used with a D-POS Antenna and D-ATOM. E.g. this can
be used to open a door when a caregiver approaches it.
Specify a certain position code by its four digit hexcode, eg. B4C5. To enable a range
of position codes add the wildcard * (star). Eg. B4* equals all position codes starting
with B4 and *C5 to enables all position codes ending with C5. If no specified position
is used, a * (star) must be entered.