Neat WALL Famiy, Technical Handbook

Page: 42 / 56

neat
42
NE41 11014-02 v4.1 WALL - Technical Handbook
Max number of bursts
Bursts are repetitions of transmissions. E.g. if short transmissions are set to 3, long
transmissions to 0 (zero) and number of bursts to 2, it will look like below. Then the
device sends 3 short transmissons, waits for a while (the “Time between bursts”)
and sends another “burst” of transmissions.
Default = 1
①
② ③
Bild 44. Concept of bursts.
# Denomination
1 Transmissions
2 Burst
3 Time between bursts
Table 13.
Concept of bursts.
To prevent accidental malconfiguration,safe values are used. If both short and
long transmissions are set to 0 (zero), the device internally uses 3 short and 3 long
transmissions. If Burst is configured to 0 (zero), the device internally uses 1.
Radio control mode
• No, function off (default)
• Yes, funtion on
5.13.2 Presence/Ready
The unit can be used to indicate Presence/Ready with either one or two buttons.
In one-button presence/ready the yellow button can be used an assistance alarm
button.
Function
One-button presence/ready Presence and Ready is done with the green button.
Two-button presence/ready
Presence is done with the green button,
Ready with yellow.
Table 14. Presence/ready functions.