Neat WALL Famiy, Technical Handbook

Page: 44 / 56

neat
44
NE41 11014-02 v4.1 WALL - Technical Handbook
6 Configuration examples
6.1 Exiting a door by pressing a PUSH
In this example the situation is quite straightforward: in a residential home a door
needs to be monitored from a reception or similar.
Prerequisites:
• A D-POS and a D-POS Antenna are mounted on a door post. A PUSH is mounted
next to the door post or in the vicinity.
• The door is equipped with a door lock mechanism.
• The door must be locked at all times but there must be the possibility to open
without a key.
• There is only one caregiver and one caretaker.
• Caregiver and caretaker wears D-ATOMs.
• The door unlocks automatically for the caregiver and the caretaker must press the
PUSH for it to unlock.
• When a care taker presses the PUSH button a lamp in the reception is lit to
indicate that the care taker is approaching and has pushed the red button
Activity
D-POS
RFID Position
Transmitter
Activity
Power
OUT1
OUT2
3 2
1
4
5
Picture 45. Schematic layout of the installation.
# Denomination
1 PUSH unit
2 D-POS unit
3 D-POS Antenna
4 Door lock mechanism
5 Light indication
Table 15. Hardware used in the setup.