Neat WALL Famiy, Technical Handbook

Page: 28 / 56

neat
28
NE41 11014-02 v4.1 WALL - Technical Handbook
6. During the configuration session the below pop up screen is diplayed and LED1
blinks green.
Picture 22.
Pop up window when reading from the unit.
7. If configuration session is successful, the pop up screen is closed and a
confirmation is displayed in the lower left of the programmer window. If the
configuration session for some reason fails, an error pop up window is displayed.
Picture 23. Confirmation notification in the lower left of the programmer window.
Communication time can be shortened if the primary frequency band is set to what
the unit is is already configured for.
5.6 Communication menu - ROOM Category
Picture 24. Communication menu.
5.6.1 Read from/write to device
To read/write configurations, follow the general procedure:
1. Connect NPU to USB port and power adaptor.
2. Insert batteries (2 x AAA) or connect 10-24V
DC
to screw terminals 7 and 8 in the
device.
3. Click Communication > Read from/Write to device to start the configuration
session. First, the software needs to read the unit’s ID code, press button 1.
Picture 25. Press button 1 to read the unit ID code.