30
PROBLEM
POTENTIAL CAUSES
Some unexpected Electronic
device malfunction
Leisure battery high voltage
(higher then 15V)
SOLUTION
We suggest to avoid the desulphation phase selecting the C o D
charging curve.
PROBLEM
POSSIBILI CAUSE
The alternator led flash 6
times
•
Detected voltage drop on the
alternator
•
Alternator insufficient power
•
Power component
overheating
•
Power loss on the cables
SOLUTION
1. Cables must have 10mm
2
(min) section.
2. Check the connections on terminals 1,2,3 and 6.
3. Connect the cable attached to terminal 1 directly to the
negative pole of the engine battery (or services),
4. Cable attached to terminal 2 directly to the negative pole of
the leisure battery (or motor),
5. The cable relative to terminal 3 to the positive pole of the
engine battery, or positive pole of the alternator
6. The cable relative to terminal 6 to the positive pole of the
leisure battery.
In case of overheating of the power components of the
electronic board, the system automatically reduces the
current supplied for charging, until the alarm returns.
