1. Set the power switch to 0.
2. Connect the negative pole of the starter battery to
POWER
SERVICE
Pin N°1.
3. Connect the fuse holder to the positive pole of the
starter battery.
4. Connect the other end of the fuse holder to Pin N°3
of the
POWER
SERVICE
.
5. Insert a 70A fuse into the fuse holder.
6. Connect the negative terminal of the leisure battery
to Pin No. 2 of the
POWER
SERVICE
.
7. Disconnect all the cables on the positive pole of the
leisure battery and connect them to pin N°5 of the
POWER
SERVICE
(Not valid for models PLUS 12-24
and GOLD 12-24)
8. Connect the leisure battery positive pole to Pin N°6
of the
POWER
SERVICE
9. Connect the D+ or ignition + signal wire to the
POWER
SERVICE
Pin n°4.
10. Only for GOLD models: connect the 230VAc mains
supply to the input IEC connector. Link the
connection after the general system safety switch
(rcd switch).
17
CAUTION
POWER
SERVICE
GOLD
version integrates a 230VAC
battery charger, therefore: pre-existing chargers, external
chargers, integrated in the control unit chargers, must be
uninstalled!
