POWER
SERVICE
units are equipped with several
protection systems to ensure a high level of safety and
security:
4. OPERATION
POWER
SERVICE
chargers provide the right charging
curve to the most common leisure battery technologies
by increasing the voltage coming from the alternator
using a DC-DC converter. the charge curve related to
the leisure battery technology in use (Wet Lead-acid,
Gel, Agm, Lithium), must be selected using internal
jumper switches. The 5 charging phases operate
independently from the input energy source, and for
each phase the voltage and current supplied are
6
PROTECTION TYPE
REACTION TYPE
Battery over-voltage
Charge is interrupted
Alternator overload
Power Service automatically shuts
off if the input voltage from the
alternator and / or the engine
battery falls below 12.8V
Over-temperature
Reduces the output current and
turns off. automatic reactivation
when the device temperature
returns to an acceptable working
level
Output short-circuit
Protection by fuses
Solar panel over-voltage
Charge is interrupted
Temperature too low
If the lithium curve is selected, then
charge is interrupted
