Chapter 3: Diagnostics
7193 Service Guide
August 1998
26
Setting Partial Cut Distance
This function allows you to change the length of the partial knife cut. The higher the
number, the longer the cut.
Caution:
The DIP switches are pre-set at the factory and should generally not be changed.
If you must change them, do so carefully to avoid changing other functions. Run the print
test to see the current settings for this function. See “Testing The Printer” in chapter 2.
1.
Turn the power off.
2.
Turn the printer over and note what the current DIP switch settings are.
3.
Set the switches to the settings in the table that match the cut distance value you want
(the higher the number, the longer the cut ).
Switch 1
Switch 2
Switch 3
Switch 4
Switch 5
Switch 6
Cut Distance Value
On
On
Off
Off
Off
Off
0
On
On
Off
Off
Off
On
1
On
On
Off
Off
On
Off
2
On
On
Off
Off
On
On
3
On
On
Off
On
Off
Off
4
On
On
Off
On
Off
On
5 (Default)
On
On
Off
On
On
Off
6
On
On
Off
On
On
On
7
4.
Turn the power back on to enter the settings into the EEROM.
On remote models, the On Line light (green) blinks.
5.
Turn the power off.
6.
Set the DIP switches to the former settings.
DIP switch 1 must be Off to return the printer to the on-line mode.
Summary of Contents for 7193
