background image

About the Boiler        5

2.2    Parts of the Boiler

2.2.1    Front View

Exhaust  
Gas Vent

Combustion  

Air Intake

2.2.2    Bottom View

a

b

c

d

e

#

Description

a

Rubber Grommets

b

Condensate Outlet

c

Gas Connection

d

Space Heating Supply Connection

e

Space Heating Return Connection

2.1    Description of the Boiler

The Navien NHB boiler is available in 4 models: NHB-055, NHB-080, 
NHB-110 and NHB-150.

The main features are as follows:

 

Ɣ

Power Interruption: When the power is restored after a power 
failure, the boiler will automatically start and return to normal 
operation. A manual reset is not required.

 

Ɣ

Freeze Protection: A sensor inside the boiler automatically 
detects the temperature and, if necessary, initiates a safety 
heating cycle to prevent internal equipment damage due to 
freezing temperatures.

 

Ɣ

Short-Circuit Protection: Any short-circuit occurring in the 
boiler’s electrical circuit immediately blows the internal glass 
fuses and automatically cuts off the gas supply.

 

Ɣ

Lightning Protection: Each boiler is specially grounded, both 
internally and externally, to protect against lightning strikes.

 

Ɣ

Carbon Monoxide Protection: The boiler is designed to maintain 
a safe air-to-gas ratio and combustion rate. This function is 
continuously monitored by the boiler’s air ratio control module.

 

Ɣ

Auto Fan Detection: The rotation of the fan is automatically 
detected and controlled. Fan failure will stop the operation of 
the boiler.

 

Ɣ

Boiling Prevention: Excessive temperatures will automatically 
stop the boiler.

2.    About the Boiler

Summary of Contents for NHB-110

























Reviews: