Service Manual Chapter7. Cash Dispenser Unit
© 2013
Nautilus Hyosung Inc.
All Rights Reserved.
7-32
Cam detection sensor (CS6, CS7)
► Cam detection sensor (CS6, CS7)
1. Remove E-ring and Cam Bracket. Then Loosen the M4 fixing screw of Sensor
Bracket (each 1 place).
2. Remove the black rubber which attached to back of the Sensor Bracket.
3. Remove the connector and the cable tie to remove the Sensor Bracket. Be careful
not to break the connector pin when removing.
4.
Press the part ‘B’ of the sensor softly as shown in the below figure to remove the
lock and the sensor.
5.
To insert the sensor, insert the part ‘A’ first and press the part ‘B’ to lock.
6. Assemble in the order of 4~1
