Service Manual Chapter7. Cash Dispenser Unit
© 2013
Nautilus Hyosung Inc.
All Rights Reserved.
7-51
Preventive Maintenance
Cleaning
► In order to prevent problems caused by sensor pollution and pick errors, the Sensor
and Roller should be cleaned hopefully. The cycle of the cleaning varies depending on
the function, location, and degree of pollution of the component.
<Note!>
M3 : Once every 3 months M6 : Once every 6 months
Y1 : Once a year Y2 : Once every two years
NO
LOCATION
INT.
REMARK
1
Main Body
/
Feed Module
CS1D,T / CS4D,T
CS10(A,B)D,T / CS13D,T
M3
Remove debris and dusts
using soft brush, air
blower and air can
2
CS2 / CS3 / CS6 / CS7 / CS8
CS9D / CS14D,T / CS15
CS11(A,B)D,T / CS21(A,B)D,T
CS31(A,B)D,T / CS41(A,B)D,T
CS12 / CS 22 / CS32 / CS42
CS16 / CS26 / CS36 / CS46
CS17 / CS27 / CS37 / CS47
CS18 / CS28 / CS38 / CS48
CS19 / CS29 / CS39 / CS49
Bearing and Scraper
(at Double Note Detection)
M6
3
Pick up
Module
in Cassette
Pick-up Roller
Feed Roller
Gate Roller
M3
Remove any
contaminations and dusts
using the soft brush, Q-tip
with alcohol
4
Rubber of Pick-up Roller
Y2 or
1,000,000
count
Replace only rubber of
Pick-up Roller with new
one
