Service Manual Chapter7. Cash Dispenser Unit
© 2013
Nautilus Hyosung Inc.
All Rights Reserved.
7-17
► CS10D (A,B)
1. First, revolve the Cam to place the temporary stacker to the upper direction.
2. Loosen the sensor support M4 fixing screw (1 place) as shown in the below figure.
3. Disconnect the connector and remove the cable tie to remove the Sensor Bracket
Assembly. Be careful not to break the connector pin when removing.
4. Remove the Sensor Bracket Assembly.
5. Loosen the M3 sensor fixing screw (1 place) of the sensor to replace from the
removed Sensor Bracket Assembly.
6. Replace the sensor.
7. Assemble the unit in the reverse order of 5~1. When assembling the Sensor Bracket
Assembly, align the rectangular to the body groove and tighten the M4 fixing screw
(1 place).
