Service Manual Chapter7. Cash Dispenser Unit
© 2013
Nautilus Hyosung Inc.
All Rights Reserved.
7-41
2. Remove the M4 fixing screw (1 place), E-Ring and encoder as shown in the below
figure.
3. Remove the clutch assembly.
4. Replace the clutch assembly and assemble in the order of 4) ~ 1).
<Note!>
When replacing the clutch assembly, adjust the tension pulley so that belt tension will
be about 100g(0.22 lb) to the direction
①
and about 200g ~ 300g(0.44~0.66 lb) to the
direction
②
when the timing belt is pressed by about 3mm(0.12 inch), using the tension
gauge.
Clutch assembly