Nautel XR6, Operation And Maintenance Manual

Page: 46 / 83

XR6/XR3 Operations and Maintenance Manual Operating the transmitter
Issue 3.1 2013-03-14 Page 2-21
Figure 2.16: Hardware Settings menu
Use the
Up
and
Down
buttons to move the cursor to the desired option, then press the
Select
button. See:
• Setting thresholds - see page 2-22
• Calibrating meters - see page 2-24
• Calibrating analog meter - see page 2-24
• Calibrate B+ Thresholds and Switching Points (3-phase ac power) - see page 2-26
• Calibrate B+ Thresholds and Switching Points (1-phase ac power) - see page 2-26
• Calibrate B+ switching points - see page 2-27
• Setting high power lockout limit - see page 2-27
• Configuring NxLink (optional) - see page 2-31
Press the
Back
button to return to the General Settings menu .
If you select
Factory Settings
, a warning screen appears.
Press the
Continue
button to move to the Factory Settings menu - see page 2-29 .
10:18 0.00kW M-1 B+1 PM:A Man Ex:A Man
HARDWARE SETTINGS
Calibration Settings
Set B+ Switching
High Power Lockout
Factory Settings
NxLink Configuration
Select Back
10:18 0.00kW M-1 B+1 PM:A Man Ex:A Man
HARDWARE SETTINGS
Calibration Settings
Set B+ Switching
High Power Lockout
Factory Settings
NxLink Configuration
Select Back
Displayed only if the
NxLink is installed and
communicating with the
transmitter’s controller.