Nautel XR6, Operation And Maintenance Manual

Page: 54 / 83

XR6/XR3 Operations and Maintenance Manual Operating the transmitter
Issue 3.1 2013-03-14 Page 2-29
Restoring factory settings
You can restore the factory settings, discarding all settings made to the transmitter, including meter
calibration settings, threshold settings, LCD contrast, meter groups, preset schedules and preset
settings. To view the
Factory Settings
menu, select
Settings
from the Main Menu ,
Hardware
Settings
from the General Settings menu , then
Factory Settings
from the Hardware Settings menu .
Figure 2.23: Factory Settings menu
Press the
Select
button to restore the factory settings. A warning appears, asking you to confirm that
you wish to proceed.
Figure 2.24: Factory Settings warning page
Note: The Factory Settings menu is available only when operating in Local mode.
10:18 0.00kW M-1 B+1 PM:A Man Ex:A Man
Select Back
Recall Factory Settings
Use the arrow keys to select Recall.
Press SELECT to proceed or press BACK.
10:18 0.00kW M-1 B+1 PM:A Man Ex:A Man
Select Back
Recall Factory Settings
Use the arrow keys to select Recall.
Press SELECT to proceed or press BACK.
10:18 0.00kW M-1 B+1 PM:A Man Ex:A Man
Confirm Back
Are you sure you want to
Recall Factory Settings
(This action cannot be undone.)
Press CONFIRM to proceed or press CANCEL
10:18 0.00kW M-1 B+1 PM:A Man Ex:A Man
Confirm Back
Are you sure you want to
Recall Factory Settings
(This action cannot be undone.)
Press CONFIRM to proceed or press CANCEL