2.
Press the pad
1
to select the Sound slot 1. Pad
1
should be fully lit.
3.
Press
BROWSE
to show the Browser. The
BROWSE
button should be lit.
4.
Press
F1
to select
FILTER
.
5.
If the bottom right part of the display is not highlighted (the attribute), press the Left or
Right Arrow button until it is.
6.
Press Left Arrow repeatedly until you see
1/4: FILETYPE
at the bottom left of the display,
then turn the Control encoder until you see
INSTRUMENT
at the bottom right of the dis-
play.
The Browser will now show all instruments only.
7.
Press Right Arrow to select
2/4 PRODUCT
, then turn the Control encoder to select
MAS-
SIVE
.
8.
Press Right Arrow to select
3/5 BANK
, then turn the Control encoder to select
MASSIVE
FACTORY
.
9.
Press Right Arrow to select
4/6 TYPE
, then turn the Control encoder to select
BASS
.
10. Press Right Arrow to select
5/6 SUB-TYPE
, then turn the Control encoder to select
BASS
LINE
.
11. Press
F2
to display the result list.
→
You can now select the bass presets by turning the Control encoder, and load the selected
preset into the selected Sound slot (Sound slot 1 in this example) by pressing the Control
encoder. But don’t leave Browse mode yet: You will learn about some useful features for
choosing a bass in the next two sections.
5.3.2
Switching to Keyboard Mode
In order to choose a suitable bass preset, you can make use of the Autoload feature (see
3.2.1, Selecting Another Snare Sample
for more information): This will directly load a Preset
into your Project as you select them in the Browser, allowing you to play them on the pads to-
gether with the drum kit Patterns you have already recorded.
As a reminder (in the software):
Adding a Bass Line
Using an Instrument Plug-in for the Bass
MASCHINE MIKRO - Getting Started - 76
Summary of Contents for Maschine Mikro MK2
Page 1: ...GETTING STARTED...
