AUDIO KONTROL 1 – 70
To check your modifications, bring KONTAKT PLAYER 2 to the front, and click on
the Chorus tab to see what happens. Now press and hold the Middle Button on
your AUDIO KONTROL 1 hardware (thus selecting the Middle Layer mappings),
and move the Controller Knob back and forth. You should see the Speed parameter
moving accordingly.
That’s it for the Controller Knob. We now want to modify the events sent when
we press the
Left
and
Right Buttons
(with the Middle Button still held), so that they
control the
Reverb Color
parameter instead of the Delay Time parameter, which we
don’t plan to use.
To do this, in the upper
Selection Area
, click on the
Left Button Area
to show its as-
signment in the lower
Definition Area
. The situation is quite similar with the former
one, but note that only the left part, ie button’s “Press” state, is assigned. This
corresponds to our wish that
something
happens when we
press
the Button, but
nothing
happens when we
release
it.
As you can see in the
Controller Number menu
, the Button currently controls Continuous
Controller #24, which indeed corresponds to the Delay Time parameter. We want it
to control the Reverb Color parameter, which corresponds to Continuous Controller
#28. So we only need to click on the Controller Number menu and select “
28
”
instead of “24”.
Do the same
for the
Right Button
on this same Layer. Your two Left and Right Buttons
should now control the Reverb Color parameter. You can check this by bringing
KONTAKT PLAYER 2 to the front and playing with the two Buttons while holding
the Middle Button.
