AUDIO KONTROL 1 – 8
Never subject the unit to extreme temperatures (e.g., direct sunlight in an
enclosed vehicle, or near a heat source), or high levels of vibration.
Do not use excessive force on the buttons, knobs, switches or connectors.
When cleaning the AUDIO KONTROL 1 hardware, use a soft, dry cloth. Do not
use paint thinner, solvents, cleaning fluids, or chemically-impregnated wiping
cloths.
Important Notes
Disclaimer: Native Instruments GmbH cannot be held responsible for damage
or data loss caused by improper use of, or modification to, the
AUDIO KONTROL 1 hardware or software. It is your responsibility to back up
data you don’t want to lose.
Specifications subject to change: The information contained in this manual is
believed to be correct at the time of printing. However, NATIVE INSTRUMENTS
reserves the right to make changes to the specifications of software and hard-
ware at any time without notice or obligation to update existing units.
Nameplate location: The nameplate is located on the bottom of the
AUDIO KONTROL 1 hardware. It lists the product’s model name and other
technical information. The serial number is also located on the bottom of the
unit.
Disposal notice: Should this product become damaged beyond repair, or for
some other reason come to the end of its useful life, please observe all regu-
lations of your country that relate to the disposal of electronic products.
Copyright: © Native Instruments GmbH 2008. All rights reserved. This publi-
cation may not be reproduced in whole or in part, summarized, transmitted,
transcribed, stored in a retrieval system, or translated into any language, in any
form or by any means without the prior written permission of Native Instruments
GmbH.
All product and company names are trademarks or registered trademarks of
their respective owners.
►
►
►
►
►
►
►
►
►
