AUDIO KONTROL 1 – 7
2. Safety Considerations
Warning
Before using the AUDIO KONTROL 1 hardware, please read the manual and
pay special attention to the instructions below.
The AUDIO KONTROL 1 hardware contains no user-serviceable parts. Do not
open it or attempt to disassemble or modify any internal hardware. If there
appears to be a hardware malfunction, immediately stop using the controller
and have it inspected by qualified service personnel.
Do not expose the unit to rain, and do not use it near water or in damp or wet
conditions. Also, never place anything on top of the controller, and be very
careful that no objects or liquids of any kind enter the unit.
This product, in combination with an amplifier, headphones or speakers, can
produce sound levels capable of damaging your ears. Do not use it for long
periods of time at high volume levels. If you experience any hearing problems
or ringing in the ears, consult a hearing specialist immediately.
The AUDIO KONTROL 1 hardware is powered by the USB bus. Operation can
be guaranteed only as a single device with a USB2 controller or with a self-
powered USB2 hub.
Caution
Before connecting the AUDIO KONTROL 1 hardware to other electronic com-
ponents, turn off the power for all devices. Before powering your system up or
down, set all volume levels to minimum. Gradually raise the volume controls
while playing your instruments to set the desired listening level.
Do not place the AUDIO KONTROL 1 hardware in an unstable position where
it might accidentally fall to the ground.
Before moving the AUDIO KONTROL 1 hardware, remove all connected
cables.
►
►
►
►
►
►
►
►
