AUDIO KONTROL 1 – 98
Extended
: Sends a
generic MIDI string
. It contains a
Text Field
for entering the MIDI
string. The string is entered byte-wise. The bytes are separated by blanks
and/or commas. The byte’s value can be entered in decimal or hexadecimal
notation. The hexadecimal notation is indicated by an “h” succeeding the byte
value without blank or comma. The
Channel menu
has
no effect when sending
extended MIDI messages
. This can be used to generically encode all MIDI
messages, particularly
SysEx commands
. Combined with the
MIDI Learn
feature,
it can even be used to record small MIDI phrases that can then be played-back
directly from the hardware.
Clicking on the
Learn switch
activates the
MIDI Learn mode
. The Mapping Application
then listens to messages on the driver’s MIDI stream, allowing you to enter the MIDI
message from any MIDI controller or master keyboard. It does
not
affect the
Channel
and
Status
selection - instead the messages are filtered by these settings. This keeps
the Learn mode selective regarding specific modes like CC Fixed/Internal etc. If
Extended
is selected with the
Status menu
, all messages are learnt without filtering,
the only exception being MIDI real-time messages. In Extended mode subsequent
messages can also be learnt; in all other cases, a new message overwrites the previ-
ous setting.To switch the
MIDI Learn mode
off, click on the
Learn
switch again.
►
