manualshive.com logo in svg

National Instruments NI PXIe-5450, User Manual

Share
Download
National Instruments NI PXIe-5450 User Manual Download Page 31

Chapter 2

NI 5450 Overview

NI PXIe-5450 User Manual

2-8

ni.com

ACCESS and ACTIVE LEDs

The ACCESS and ACTIVE LEDs indicate the status of the PXIe module:

ACCESS LED

The ACCESS LED indicates basic hardware status as shown in the 
following table.

ACTIVE LED

The ACTIVE LED indicates the device state as shown in the following 
table.

Color

Indications

Off

Device is not yet functional, or the device has 
detected a problem with a power rail.

Amber

The device is being accessed.

Green

The device is ready to be programmed by 
NI-FGEN.

Color

Indications

Off

Device is not generating.

Amber

The device is armed and waiting for a trigger.

Green

The device has received a trigger. Also indicates 
that the device is generating a waveform.

Red

The device has detected an error. NI-FGEN must 
access the device to determine the cause of the 
error. The LED remains red until the error condition 
is removed. Errors might include unlocked PLLs or 
an over-temperature condition.

Summary of Contents for NI PXIe-5450












































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands