NARDA NBM-550, Operating Manual

Page: 77 / 156

6.3 General settings
Narda NBM-550
67
The magnetic field range is displayed in Gauss if you have
previously selected Gauss as the units.
To set the display to Gauss:
1. Open the
Magnetic field unit
function
Open the
Frequency mode
function
(MAIN MENU/MEASUREMENT SETTINGS/...).
2. Use the arrow keys
▲
/
▼
to select the
Gauss
setting and
press the
OK
key to confirm.
3. Press the
ESC
key twice to return to measuring mode.
Changing the result type
Different result types are available depending on the display
type. The table below gives an overview:
Maximum
The maximum measured value is retained.

You can reset the maximum value and restart the
measurement by pressing the
ESC
key.
Result type
ACT
(Actual)
MAX
(Maximum)
AVG
(Average)
MIN
(Minimum)
Monitor
1)
X X X X
XYZ X – – –
Spectrum
2)
X X X –
Standard
2)
X X X –
WPM
2)
X X – –
1) All result types are shown simultaneously.
2) Only one result type can be selected at a time.